Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
L angleOk, plans call for rear fuselage L channel to be 20mmx20mm, by my calculations 20mm comes out to be .78 inches(rounded off) so the question… Started by Robert Boyd in Open Discussion Forums (non model specific) |
5 |
Aug 23, 2019 Reply by Dan Hill |
pulls leftfinished my 750 STOL and when I went to take off it flew left. I gave it full right rudder and when I touched down the plane flipped forwa… Started by david junkins in Open Discussion Forums (non model specific) |
31 |
Aug 22, 2019 Reply by david junkins |
RivetingSo someday when I get to do some riveting, how important is it to purchase the riveters with specially ground heads? Would any hand riveter… Started by Robert Boyd in Open Discussion Forums (non model specific) |
14 |
Aug 22, 2019 Reply by Dan Hill |
Fault IndicatorThe install manual shows that a fault indicator light should be installed on the panel to light up if the ECU detects certain faults. The… Started by Perry Hyden in UL Power Forum |
3 |
Aug 22, 2019 Reply by David J. Beaulieu |
701 Parts701 FACTORY KIT PARTS FOR SALE TO GOOD HOME (BUILDER!) SOLD! Windscreen – Aeroplastics 1387 clear SOLD! Firewall 7F1-1 SOLD! Noseleg includ… Started by Mark A Phillips in Classified / For Sale Postings |
8 |
Aug 21, 2019 Reply by Mark A Phillips |
Complete NEW Analog Panel For SaleI have For Sale a new Analog Panel currently in a Zodiac CH650. It could be adapted to a CH 750 Cruzer or Super Duty. I do not want to sepa… Started by Dan Pohle in Classified / For Sale Postings |
1 |
Aug 21, 2019 Reply by Richard Kurlinski |
Zenith 601XLB for Sale by Owner/BuilderContact Edward J Temos at 717-792-3050 For Details about the plane. Started by Edward J Temos in Classified / For Sale Postings |
0 | Aug 21, 2019 |
Turbo questionsI would just like to hear any and all opinions about going with a turbo system in order to get to a HP requirement I need for my chosen Zen… Started by George Burns in Corvair Engine Forum |
12 |
Aug 21, 2019 Reply by Ernest Christley |
Zenith CH 750 SD Tail Kit New in the Box $1500Zenith CH 750 SD Tail Kit New in the Box This can also be built as upgrade for CH 750 STOL with heavy nose to reduce Prop Strike $1500 Cal… Started by Dan Pohle in Classified / For Sale Postings |
0 | Aug 21, 2019 |
RivetingThanks for all the replies. I will definitely purchase the air riveter from Zenith with the special heads. For the money it’s a no brain-er Started by Robert Boyd in Open Discussion Forums (non model specific) |
4 |
Aug 20, 2019 Reply by John Austin |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
