Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
Zinc Chromate (Cortec) Primer sourceHi guys Was trying to source the zinc chromate primer that is brushed on. . I ve done a search on here and online but not found a link to… Started by Michael T. in Open Discussion Forums (non model specific) |
12 |
Nov 28, 2017 Reply by Joe Spencer |
Looking to buy CH750 complete kit or planeI am looking for either a complete kit or completed plane, either model 750 is fine, but must be the latest edition with the raised roof (a… Started by Lonnie Fosgate in Classified / For Sale Postings |
19 |
Nov 27, 2017 Reply by wayne leblanc |
Just making sure I`m reading the DCS right- The Rudder Horn is also 6061-T6Hi guys I`m ordering some material and just want to double check the rudder horn and Elevator horn plate construction In my DCS it calls… Started by Michael T. in Open Discussion Forums (non model specific) |
0 | Nov 27, 2017 |
Does it matter how fast aluminum gets bent?I was going to try bending aluminum stiffener(L shaped) that's longer than 8 feet. But doing it in a gig, the metal will be slam formed. Fo… Started by Michael T. in Open Discussion Forums (non model specific) |
0 | Nov 26, 2017 |
O-200 Engine in Parts for saleComplete O-200 engine in parts (Fuel Pump Case) that are new & certified parts. Bottom End 10 K. All small parts power coated. New cyl… Started by Charles L Smith in Classified / For Sale Postings |
1 |
Nov 26, 2017 Reply by William |
Adding right seat brakes.I've searched the 750 page a bit, builder resources, and some good ol' fashioned Googling, but haven't happened upon what I expect is a sim… Started by Conor Whitehead in Open Discussion Forums (non model specific) |
9 |
Nov 25, 2017 Reply by Loren Warner |
Big tires on 801Looking to put big tires on my 801. Has anyone done this also have a 76x56 prop want to put a cat to 86 38 on any one done this also Started by Jerry in Open Discussion Forums (non model specific) |
0 | Nov 24, 2017 |
Real World experience with warp drive props and rain?As "winter" (read "rain") approaches in Northern California I would like to hear from those who have flown with a warp drive prop in the ra… Started by Gary Welch in Open Discussion Forums (non model specific) |
4 |
Nov 24, 2017 Reply by Loren Warner |
Intercom (SOLD)For Sale: Flightcom Intercom, 403LSA, Spruce Part number 11-07871, purchased maybe 2014 or so, been installed in panel but never hooked up… Started by Roger E Barnes in Classified / For Sale Postings |
2 |
Nov 24, 2017 Reply by Roger E Barnes |
750 fwf Rotax parts wantedHi All, I am looking for any and all components for my Rotax 912 firewall forward install. I have the Rotax, but need everything else! Than… Started by steve larson in Classified / For Sale Postings |
0 | Nov 24, 2017 |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
