Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
Replacing some rudder hinge rivets with boltsHi guys I read somewhere on a ch640 builder site that some builders have replaced rivets on the rudder and elevator hinges with bolts I d… Started by Michael T. in Open Discussion Forums (non model specific) |
2 |
Dec 16, 2017 Reply by Michael T. |
CH 801 - first page and stuck already :)Hi all, Just started building 801 the rudder. The first page says take the 8R2-1 Rudder Spar and the 8R2-2 Spar Doublers and "check that… Started by Erturk Kocalar in Open Discussion Forums (non model specific) |
1 |
Dec 16, 2017 Reply by Erturk Kocalar |
Best Bang for the Buck $$$Have 84 + flight hours on my Viking 130 powered CH-601 xlb.Viking 130 sarts ease, runnins smooth and burns 5.4 gallons of car gas.In my boo… Started by Richard Jones in Open Discussion Forums (non model specific) |
3 |
Dec 16, 2017 Reply by Richard Jones |
Slider canopyhello Îm looking for drawing to do a slider canopy .thank you for your help Started by ARNAIZ in Open Discussion Forums (non model specific) |
0 | Dec 15, 2017 |
Reference materialAny recommendations for reference books etc on electrical systems, wiring etc for the uninitiated. I was a semi trained army killer not an… Started by Byers Coleman in Open Discussion Forums (non model specific) |
11 |
Dec 14, 2017 Reply by Don Morrisey |
Hello. Looking to correspond with any North Island CH701 pilots! We hope to be in NZ month of Feb-March 2018 and would love to do some 701 flying. Bob from CanadaI have over 400 hundred hours on my 701 and would like to visit with a NZ 701 pilot in Feb-March 2018. My e-mail is miniwas@shaw.ca Thanks… Started by bob mccully in Open Discussion Forums (non model specific) |
0 | Dec 12, 2017 |
Your panel is telling you something, so what should be your response?With nearly 200 hours on my 601 XLB in the past year and three months, I re-started thinking about emergency procedures. During Phase 1 te… Started by Gary Welch in Open Discussion Forums (non model specific) |
4 |
Dec 11, 2017 Reply by Jerry Griego |
Thank You John AustinJohn, your style as Moderator is much appreciated, as is your selfless time and effort. Thank you Started by Loren Warner in Open Discussion Forums (non model specific) |
6 |
Dec 11, 2017 Reply by dan glaze |
Rotax with Zipper big bore experienceAnyone out there flying an 80 hp Rotax 912 with the zipper kit? Looking for some feedback based on long term (say, a few hundred hours) exp… Started by Jim and Amelia Isaacs in Open Discussion Forums (non model specific) |
3 |
Dec 10, 2017 Reply by Jim and Amelia Isaacs |
Lyc. O-290 D2 (For Sale)I have a Lyc O-290 for sale with all accessories and exhaust. Removed from a super cub last year for engine upgrade. Have logs. 620 hours s… Started by Elijah Lewis in Classified / For Sale Postings |
4 |
Dec 9, 2017 Reply by Jeremy w malecki |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
