Online Community of Zenith Builders and Flyers
Sort by: View
| Discussions | Replies | Latest Activity |
|---|---|---|
Jabiru 3300 Cooling Enhancements, Ram Air Duct ModificationsAlthough the CHT's are perfectly normal in my Jab 3300/STOL 750, it's become a "mind game" with me to see just how low and how balanced I c… Started by John Austin in Open Discussion Forums (non model specific) |
0 | Sep 14, 2015 |
WingShould I completely finish one wing before starting another. I have 601xl both wings are started plus the fuselage is together Thanks, Tom Started by Thomas M. Pagel in Open Discussion Forums (non model specific) |
0 | Sep 13, 2015 |
SAFETY Fire Accident Fuel breakaway valve issueHere's a post from another site for your info. Has anyone contemplated installing or actually installed breakaway valves at critical places… Started by Wayne Tyson in Open Discussion Forums (non model specific) |
0 | Sep 13, 2015 |
Where do I connect the shielded wires to on this magneto?It's a Bendix S4LN-21. Trying to understand where the inner wire is connected as well as the outer shield wire. I'm guessing one goes to wh… Started by Gary Welch in Open Discussion Forums (non model specific) |
3 |
Sep 13, 2015 Reply by david shrader |
Fuel quick-drain replacementI've got a quick-drain (750) that sometimes drips a very tiny amount of fuel (I left my door open and it dripped on the plexi and frame, so… Started by Wayne Tyson in Open Discussion Forums (non model specific) |
5 |
Sep 13, 2015 Reply by Wayne Tyson |
Ch 750Purchased a few days ago my first 750 and didn't realized that there was a lot of Zenith planes in the USA. This is a new experience with t… Started by Larry Griffin in Open Discussion Forums (non model specific) |
10 |
Sep 11, 2015 Reply by Wayne Tyson |
ChecklistAnyone have a checklist for my 750...Jabiru 3300a that y'all use? The only thing I have is draft and general info. I'm sure someone has ma… Started by Larry Griffin in Open Discussion Forums (non model specific) |
0 | Sep 10, 2015 |
Excessive cabin heat at feet and under instrument panel - Need recommendationsMy instrument panel is basically a sealed box to trap heat. I did install a small 12V fan to get a little heat out to keep the instruments… Started by James R Depfer Sr. in Open Discussion Forums (non model specific) |
3 |
Sep 10, 2015 Reply by Walt Snyder |
WTB - O-235 Conical Engine Mount for 601 XLPlease let me know if you have one for sale and how much you would like for it. I live in Cloverdale California. You can email me direct at… Started by Gary Welch in Classified / For Sale Postings |
1 |
Sep 8, 2015 Reply by Geoff Downy |
Lower windshield seal?I have a CH 701. Doing some modification and wish to improve the look of the seal between the lower windshield and the upper panel cover… Started by Jerry Pommerenke in Open Discussion Forums (non model specific) |
3 |
Sep 2, 2015 Reply by Jock Struthers |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).