Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,813)
| Discussions | Replies | Latest Activity |
|---|---|---|
Updated Garmin G3XA couple of days ago, Garmin announced an updated G3X system which has more capability and an overall lower cost than before. I'm really i… Started by Aaron May in Open Discussion Forums (non model specific) |
2 |
Mar 28, 2013 Reply by Aaron May |
TowingHas anyone used a 701 to tow gliders? Started by lee keller in Open Discussion Forums (non model specific) |
2 |
Mar 28, 2013 Reply by Zenith.Aero |
CORVAIR CRANKSHAFT and CASERevised listing for sale crank is an 8409 new timing gear threaded for safety shaft nitrided ground .010 for rods-.020 for mains perfectl… Started by Frederick Schutt in Classified / For Sale Postings |
2 |
Mar 26, 2013 Reply by Chris Craver |
Easy, quick, lightweight, cheap way to make sure you are building straight components with no twistI bought 3 pieces of 8 ft long vinyl fence post from Home Depot. Cut one in half and lay the two piece perpendicular to the two longest pie… Started by Christopher Braun in Open Discussion Forums (non model specific) |
3 |
Mar 24, 2013 Reply by Christopher Braun |
Whats on the back of your car???show off the stickers Started by Tracy Buttles in Open Discussion Forums (non model specific) |
2 |
Mar 21, 2013 Reply by Marty de la Motte |
zenair ch701 for sale "SOLD"I was taking flying lessions this fall on a 152 and bought a well built, completed ch701 with only 19 hours on it (I never flew it) and it… Started by Lorne Cater King in Classified / For Sale Postings |
6 |
Mar 21, 2013 Reply by Lorne Cater King |
How to rebuild cordless batteriesI have some dead 18v batteries, cost about $70 each. Finally went looking for a video to rebuild and sure enough, found one on YouTube. It'… Started by Jake Reyna in Open Discussion Forums (non model specific) |
0 | Mar 20, 2013 |
Root rear RibHi All, We have started working on the wing skeleton and facing a small problem with the root rear rib (75W4-3). The Drawings Manual shows… Started by KAU AERO TEAM in Open Discussion Forums (non model specific) |
4 |
Mar 19, 2013 Reply by Clint L Gosch |
Bolts in CH 701 wing strutsWhat size bolts go in the joint of the wing struts on a CH 701? Plans show a solid wing strut. Started by Lex Brown in Open Discussion Forums (non model specific) |
5 |
Mar 18, 2013 Reply by Chumphol Sirinavin |
CH601 HD Elevator leading edge dent - Need adviceLooking for some advice...I have a inch and a quarter dent in the leading edge of my elevator. Any ideas as to how I can pull the dent ? I… Started by Randy Cross in Open Discussion Forums (non model specific) |
21 |
Mar 16, 2013 Reply by Patrick Borton |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
