Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,813)
| Discussions | Replies | Latest Activity |
|---|---|---|
canopy pivot point ? 601xlInstalling the canopy frame rails and unable to find the measurement from the firewall web to the canopy pivot point on the top logerons in… Started by daniel schaffer in Open Discussion Forums (non model specific) |
1 |
Oct 6, 2012 Reply by Jacky Winters |
Using a Corvair EngineI have a question for those of you using, or planning to use the Corvair Engine. After the recent failure of Mark Langford's engine, are… Started by Rodney Wren in Open Discussion Forums (non model specific) |
13 |
Oct 5, 2012 Reply by charles e rehberger |
Building an improved Flap Actuator HandleI want to upgrade the flap handle on my 701. I'm not really looking for a bunch more flap because I believe this plane does fine without it… Started by Vance Simons in Open Discussion Forums (non model specific) |
3 |
Oct 3, 2012 Reply by Lawrence F Bird |
Locking Fuel Caps for Zenith AircraftThere is a possibility of working on a locking fuel cap option for all the different Zenith models. What would be the interest in locking… Started by Steven Tschurwald in Open Discussion Forums (non model specific) |
4 |
Oct 2, 2012 Reply by Danal Estes |
Newbie questionMay be a stupid question, but are finger prints on the bare aluminum corrosion? I had to let things sit for a while and was a bit surprised… Started by Chris Craver in Open Discussion Forums (non model specific) |
2 |
Oct 1, 2012 Reply by John Austin |
Diaper your cowl!Somewhere in the process of fitting my 750's cowl, I let the spinner/cowl gap get pretty narrow: about 3/16" or so. (Yes, I used the "donut… Started by John Austin in Open Discussion Forums (non model specific) |
1 |
Sep 28, 2012 Reply by Jimmy Young |
Source of 2" square steel beamsAll, Does anyone have a source (store / part #) of the 2" square steel beams (painted red) used in the rudder workshop and seen in factory… Started by Joel Studtmann in Open Discussion Forums (non model specific) |
6 |
Sep 28, 2012 Reply by Mark Maltais |
Zodiac 601 HDS for salePlane previously reg. in canada. Is apart for transport hauls well on car trailer. Has Subaru Status eng,king gps navcom . Great condition… Started by Dennis M Hettrick in Classified / For Sale Postings |
0 | Sep 24, 2012 |
Weight and balanceGroup, I'm ready to do a weight and balance. I already have oil in the engine, do I need to drain it to do the process? Ed Started by Dr. Edward L. Olds III in Open Discussion Forums (non model specific) |
10 |
Sep 23, 2012 Reply by Dr. Edward L. Olds III |
Sky view in 750Hi all just received my Dynon Sky View for 750 One question Where is the best position to place the sv-adahrs unit to get best out of it. A… Started by Peter Ratcliffe in Open Discussion Forums (non model specific) |
3 |
Sep 20, 2012 Reply by Gary Burdett |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
