Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,812)
| Discussions | Replies | Latest Activity |
|---|---|---|
Rivet holesHi All As I continue building on my 750 fuselage I got to thinking about all those holes in the rivets. Especially the ones looking up. Has… Started by Jeff Roberts in Open Discussion Forums (non model specific) |
4 |
Dec 21, 2011 Reply by Jeff Roberts |
CH 750 for saleMy name is Mike Kingery and due to health issues I am selling my 750 which I completed in Jul 2010. TT 77 hrs, Continental 0-200 TSO eng 46… Started by Mike Kingery in Classified / For Sale Postings |
13 |
Dec 20, 2011 Reply by Mike Kingery |
Jabiru Engine MountNIB Jabiru 2200 to 701 Engine Mount $500 Started by Jerry Griego in Classified / For Sale Postings |
0 | Dec 18, 2011 |
701 motor mount for saleWilliam Wynne 701/Covair motor mount . Has about 25 hours on it. Like new. $499.00 Started by Ralph Sonnicksen in Classified / For Sale Postings |
0 | Dec 17, 2011 |
Actuator Arm travelHi 750 Builders, I was placing my actuator arm on it's bracket and noticed the travel on the mixer control was about 1.5 inches with the st… Started by Jeff Roberts in Open Discussion Forums (non model specific) |
5 |
Dec 14, 2011 Reply by Jimmy Young |
MD-RA inspections...Just going through the list of what has to be inspected at the pre-cover inspection here in Canada. Can anyone who's gone through it verif… Started by Mark Maltais in Open Discussion Forums (non model specific) |
8 |
Dec 12, 2011 Reply by Mark Maltais |
CH650B Center spar building questionI am about to make the spacers for my center spar and am looking for some help and or comments. Unless I am misreading things, per my plan… Started by Tim Smart in Open Discussion Forums (non model specific) |
6 |
Dec 9, 2011 Reply by Tim Smart |
brakesmy brakes are very poor just slow me downenough to not fall off the end of the stripseem to be getting worse plenty of pad left Started by Paul Hammond in Open Discussion Forums (non model specific) |
5 |
Dec 8, 2011 Reply by Jacob |
701 helpI have been building a 701 for several years, not a full time thing for me as I hope any one may see. Wings, rudder, horizontal tail done.… Started by David Stone in Open Discussion Forums (non model specific) |
1 |
Dec 7, 2011 Reply by Randy Owen |
Wanted: Completed 701 For Sale by Motivated SellerLooking for a moderately priced used 701 for sale by motivated seller.If you have one or know of one please contact me. Tom Tweedy … Started by Tom Tweedy in Classified / For Sale Postings |
1 |
Dec 5, 2011 Reply by Bob McDonald |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
