Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,813)
| Discussions | Replies | Latest Activity |
|---|---|---|
CH 701 - 912 UL with high EGTI have recently finished my 701 and started flying, but am worried that the EGT’s. They are running around 1600 degrees Fahrenheit. The CHT… Started by Jim Kuntz in Open Discussion Forums (non model specific) |
13 |
Nov 18, 2023 Reply by Bert Shivers |
Selling in phase 1Thinking about selling my Cruzer. It is just in phase 1, only 3 short flights. Would it be better to fly the phase 1 flights before tryin… Started by Perry Hyden in Open Discussion Forums (non model specific) |
3 |
Nov 17, 2023 Reply by Matt Bunton |
Jabiru Gen 4 manifold pressure?Hi. I am trying to figure out the wiring for the Dynon sensors on my Gen 4 Jabiru 3300. I am not familiar with the engine, I have always… Started by Fred Wellman in Jabiru Engine Forum |
8 |
Nov 16, 2023 Reply by Fred Wellman |
Winter Oil TempsHi all, I live in the Seattle area and it gets cold, Im worried my oil temps are too low. The manual says a minimum of 59 degrees is accep… Started by Sam Cyphers in Jabiru Engine Forum |
5 |
Nov 15, 2023 Reply by David Gallagher |
Wanted - 701 ElevatorKit or assembled - preferably assembled Started by Bob Connors in Classified / For Sale Postings |
0 | Nov 13, 2023 |
Senenich C70MY low inertia Propeller bladesI am looking to replace my Warp Drive propeller blades with low inertia Senenich C70MY blades (low inertia foam core blades designed to fit… Started by Mark Bengel in Rotax Engine Forum |
5 |
Nov 13, 2023 Reply by Jerry Griego |
650B with UL Power 350iS for sale ... SOLDZenith 650B for sale by owner/builder. Plane is beautiful in and out and flies great. Always hangered, NDH, full logs, excellent POH includ… Started by David R Ferrell in Classified / For Sale Postings |
3 |
Nov 13, 2023 Reply by David R Ferrell |
O-200 sitting idle for yearsI am close to pulling the trigger on buying a 2008 AMD Zodiac 601 XLi with 50 hours on airframe and engine (O-200). The plane was in the M… Started by Gary Vogt in Continental Engines |
8 |
Nov 13, 2023 Reply by Mike Risko |
Rotax 912 radiator replacementHello Gang. So....at our last 701 annual, we found that one of the radiator threaded mounts had come loose from the side of the radiator. F… Started by P. Richards in Open Discussion Forums (non model specific) |
2 |
Nov 11, 2023 Reply by Jim and Amelia Isaacs |
601 updates?Good morning all It’s getting to be that time of the year. My Annual Condition Inspection is coming due. In the process of researching upda… Started by brad cohen in Open Discussion Forums (non model specific) |
2 |
Nov 9, 2023 Reply by John Burns |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
