John Austin's Discussions (4,582)

Search Forum

View

Discussions Replied To (1599) Replies Latest Activity

"I had an edition 1 kit upgraded to an edition 2. The new fork came out after the edi…"

John Austin replied Aug 8, 2014 to CH 750/701 STOL Operations, Techniques, Comparison of Configurations and Tricks-of-the-Trade?

 37 Aug 11, 2014
Reply by Wayne Tyson Jr

"Ron, Thanks for the helpful link. However, we've plowed that ground several times in…"

John Austin replied Aug 8, 2014 to CH 750/701 STOL Operations, Techniques, Comparison of Configurations and Tricks-of-the-Trade?

 37 Aug 11, 2014
Reply by Wayne Tyson Jr

"Initially the ball was a little off-center on my 750 and I found it took a slight, c…"

John Austin replied Aug 8, 2014 to problem keeping ball centered at higher spreed

 1 Aug 8, 2014
Reply by John Austin

"That's the way they come, Wayne. You have to determine the center-line of the top of…"

John Austin replied Aug 8, 2014 to CH 750/701 STOL Operations, Techniques, Comparison of Configurations and Tricks-of-the-Trade?

 37 Aug 11, 2014
Reply by Wayne Tyson Jr

"I'd leave it at 6.2 - a little rich - until you've thoroughly broken-in the engine a…"

John Austin replied Aug 8, 2014 to Upper elevator cable chaffing

 8 Aug 8, 2014
Reply by Dr. Edward L. Olds III

"Had a great trip! But no,  Jabiru was very much present! They had an outside display…"

John Austin replied Aug 7, 2014 to Upper elevator cable chaffing

 8 Aug 8, 2014
Reply by Dr. Edward L. Olds III

"Ram, The STOL 750 has very little performance difference without slats and with VG's…"

John Austin replied Aug 6, 2014 to Slats and VG's

 34 May 5, 2023
Reply by John Austin

"Chris Heintz in his article said he had no problems with removing the slats and the…"

John Austin replied Aug 4, 2014 to Slats and VG's

 34 May 5, 2023
Reply by John Austin

"Additional information ... the 20mm height will leave enough room for for an adequat…"

John Austin replied Aug 4, 2014 to Slats and VG's

 34 May 5, 2023
Reply by John Austin

"Usually when I say "slats" I mean a "normal" 750 with the slats installed as-designe…"

John Austin replied Aug 4, 2014 to stall warning device and fuel gauge questions

 12 Aug 4, 2014
Reply by Walt Snyder

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service