Hi there, I’m hoping to pick up some advice on oil cooler installs for my recently purchased 801 powered by ECI io370. The cooler is a 7 fin exchange mounted in front of number 2 cylinder and clearly too small for the job. My thoughts are replacing the cooler with a larger unit in present location or mounting a 2nd unit on the firewall.
I would much appreciate any assistance from builder’s that have had the issue.
cheers
James
Tags:
I worked through the same issues in phase one testing of my 801 with an IO-375. The forward mounted oil cooler was not adequate for the heat produced by my engine. I ended up with a firewall mounted cooler (airflow systems 2006x), with its own intake so as not to steal too much air away from CHT cooling. Bill Genevro at airflow systems is a wizard with this stuff, and was extremely helpful to me working through this.
hi James,
what kind of propeller you have on your IO 370 x ch 801? let me know please
jean
Hi Jean,
sorry for the late reply. I have a Whirlwind GA200L-STOL . It’s carbon fibre ground adjustable 80 in.
cheers
James
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).