Anyone use SPRL Fuel Selector Valve?

I'm coming up on the time when I'll need a fuel selector valve.  I looked up Aircraft Spruce and saw the Andair valves, but right next to them was a brand I've never heard of - Newton SPRL.

Has anyone used these valves? Aside from purchasing the fittings for it, any drawbacks?

Thanks;

Views: 506

▶ Reply to This

Replies to This Discussion

Permalink Reply by Paul Sanders on August 4, 2019 at 8:06pm

I installed one in my 750 STOL and have had no complaints, works as advertised. They were also very quick and helpful when I asked some questions. I have no experience of these things to compare it with but the unit seemed sturdy and well made. 

Permalink Reply by Fred Williams on August 5, 2019 at 4:19pm

I have a slightly used Andair valve /duplex with left /right and return.  I ended up using a Viking header tank and did not need the valve.  See previous post.  make me a reasonable offer and it's yours.  Included are 90 deg fittings.  All AN6  . 

Dr Fred

Permalink Reply by James Clapper Jr. on August 6, 2019 at 3:38pm

The Newton valve is included in the Zenair firewall forward kit for the O-200, if you are planning to purchase it.

Permalink Reply by Carl Orton on August 6, 2019 at 3:40pm

Good to know; I was thinking about the Zenair kit, but not quite ready for it yet.  Didn't know that selector was part of their kit....

Permalink Reply by James Clapper Jr. on August 6, 2019 at 5:47pm

I didn't notice it on the pick list when I ordered the kit, but when it showed up, I was so impressed with the smoothness of operation, and quality of appearance, I re-plumbed my fuel system to make use of it. The 3 special fittings were included.

Permalink Reply by Joe Pringle on August 16, 2019 at 3:34pm
I have on installed on my project. Haven't flown it yet. I mounted it on the floor under the center console, and used an extension to link the valve to the control know that is on the top of the console. This way, there is no low point in my fuel line except the gascolator.
Permalink Reply by Rob A on August 18, 2019 at 7:48pm

hi Joe,

What extension did you use? I see Aircraft Spruce has a 12" one with a universal joint but it's way too long and pricey. Is this what you used? I like the idea of mounting it on the floor like you explained.

Permalink Reply by Michel Ruf on August 18, 2019 at 5:07am

I installed one in the center console. On/Off SPRL Valve

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service