Working on my 750 STOL wings and it’s the first piece with a few A-6 rivets. I bought my pneumatic and hand rivet pullers from Zenith and they have the modified nose pieces that dome the rivet heads for A-4 and A-5 rivets, but nothing for A-6. Do I need to make/order a domed puller for the A-6 rivets, or do I pull them with the flat nose? I’m sure this is answered somewhere already, but I couldn’t pull up anything with a search. Thanks for any help,

Keith

Views: 275

Reply to This

Replies to This Discussion

you just use the flat head

I took a tapped out old hand riveter and made another concave head for the dozen or so A6 (3/16) rivets in 750 (none in 701). I think you use a 135 deg drill bit, no marks on rivet, no marks on skin and you are good to go. spin it in your drill press with some scotchbrite to make it nice. 

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service