Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Center Spare Installation CH 650
Our spar angle is 78 degrees. The skin cut out for the spar appears to be the 83 degree value.
Has anyone else seen this problem and what is the reccommended fix?
Replies to This Discussion
-
Permalink Reply by Caleb Gebhardt on
-
I haven't run across that before. It should be bent to 83 degrees. The maximum acceptable tolerance for the bend angle is +/- 1.7 degrees. 78 degrees is too far off to use and I don't recommend using if its that far out. The way the center spar is made I don't think it will be something that you can fix. Send me some pictures of it showing the bend angle and we will get it worked out for you. My email address is caleb@zenithair.com.
-
Permalink Reply by Brenda Smith on
-
The Data Plate information on the Center SPAR is: Top Line 6 W 4
Bottom Line 63465-7
Brenda
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
