I've upgraded to a Jabiru Gen 4 3300 and have several parts in the hangar for which I no longer have a use.  It is up to the buyer to determine suitability/compatibility and the items are not returnable.  Items are used and may need refurbishing, gaskets, etc., but functioned perfectly at time of removal.

(SOLD) Cummins polished aluminum spinner compatible with Jabiru 3300 or other
engine with prop hub with SAE 1 bolt pattern. Known compatible with Sensenich
W68CK36 wood prop and optional Sensenich ground adjustable carbon fiber prop
2AOJ5R64ZN as supplied by Jabiru USA with Zenith STOL 750 FWF kit. Removed
at 820 hrs – no dents or dings – just needs a good polish! Back plate and spinner
to-backplate screws and washers included. $200 + actual shipping cost.

STILL AVAILABLE! Bing 94 carb as supplied as original equipment on my Gen 2 Jabiru 3300. Includes
extended throttle arm as supplied in Jabiru USA FWF kit and an assortment of main and needle jets for
tuning. Working perfectly when removed at 434 hrs – removed to experiment
with alternative carb and never reinstalled. These are no longer manufactured by
Bing and would be great as a spare or for parts. Never exposed to ethanol fuel. (Moved to eBay with more photos and details on jets, etc.  Listing is here: https://www.ebay.com/itm/396232981569

(SOLD) 4” custom aluminum intake runner/carb spigot, compatible with all Jabiru
generations that have machined plenum with bolt on carb spigot. On my Gen 2,
provided superior EGT balance with AeroInjector carb. Not compatible with late
Gen 4’s that do not have bolt-on carb spigot. $50 + actual shipping cost.

STILL AVAIILABLE! ACS Gascolator 10580. Removed at 463 hrs when fuel system reworked with in-line filter installation replacing gascolator. Never exposed to ethanol fuel. $60 OBO + actual shipping cost.

If further details are necessary, please send me a message on this forum or direct email me "john at jaustinmd dot com" .

Thanks,

John 

N750A