Flaperon Actuator Mount Question

For the 5th ed Cruzer, which has the same flap motor set up as the SD, when I attach the motor to the mount it is a tight fit.  With the mount held flat on the bench with one hand if I grab the end of the actuator I can only move it by +/- 0.5".  Basically I can wiggle it a little.  Is that normal or should it move more than that?

(Edit: I'm not sure why the forum is rotating my pics 90 degrees)

Views: 22

Attachments:

▶ Reply to This

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2025   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service