Online Community of Zenith Builders and Flyers
Hoping someone out there has done the full Dynon EMS installation with a 130 and has info on wiring and settings. Having a summary sheet available would be great to cut installation time as well as provide a checklist of connections. Sensor setup for the two Dynon temp and pressure sensors, fuel flow 'red cube' sensor, Viking ECU tach output. If nothing shows up by the time I start, I'll document this myself and post.
Just finished the full Dynon Skyview install. They provide a pdf file with nicely done diagrams for most of the wiring. The Intercom has it's own separate pdf file. Easy to follow, pinouts and wire color codes are shown.
Any chance you could post up your setup and the pdf?
All the pdf files are available for download in the Support section on the Dynon website.
My problem with my Dynon intercom instruction, is for the radio side it shows a db15 connector, I have a 25 pin. So I am waiting for updated instructions.
The Installation Guide I downloaded has diagrams for different radios. I used the one for the T-25 and it uses only 5 pins and shows the pins on both sides to connect together.