Looking for advice on how to tighten these little guys. They are the anti-vibration mounts for the oil cooler.
The provided lock nuts are so tight on the bolts that I cannot turn them without damaging the threads or the rubber piece. Got the one nut on a little but the rubber cylinder started tearing up. Tried holding the threads with pliers but the threads started shearing off. Then couldn't get the nut back off. Ending up cutting it off with a Dremel.
Any advice? Even different options for mounting?
Tags:
You may need to run a tap through the nuts to slightly reduce the friction of the locking nuts. Of course, too much and you have lost the locking function. Just right and you can install it and keep the locking function of the nut. I have often had to do this with nut-plates and screws.
Zenith Planes & Parts For Sale
Classified listings for buying or selling Zenith builds and parts...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).