Linear Actuator Control Rod Hole Misalignment

I'm trying to put together the flaperon actuator for my 5th ed Cruzer.  It has the same set up as the SD.

The Linear Actuator Control Rod has pre-drilled holes through it to attach it to the end of the actuator with an AN4 bolt.  My problem is that the holes aren't exactly in the center of the cylinder so when I try to put the bolt through it doesn't align with the hole on the other side.  I've attached pics.

My question is can I open up the "exit" hole to get the bolt through or would this allow slop and cause an issue with flaperon movement?  I'm thinking that the bolt going through one side, then the actuator, and the nut being properly torqued it should be ok.

Anyone else have this issue?

Views: 36

Attachments:

▶ Reply to This

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2025   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service