I purchase an old ch801 kit that was started 15-20 years ago. Getting ready to set it on gear so I am assembling the tires on wheel (800-6). Strange is the nose wheel. Came in three parts; two opposite sides and a 1 inch wide spacer ring in between. Does not fit together well and none of my hanger rat buddies has ever seen such a lash up. Anybody know anything about this wheel configuration? Thanks, Bill

Views: 360

Reply to This

Replies to This Discussion

Meant to say in the title that it is a Matco wheel, NW600CC that has the one inch spacer ring in between the wheel haves.

Hello fellow builders, checked with Dan N. builder from Tennessee says his nose wheel was/is just the two side haves. So wonder what I have in this kit?

This is purely a guess but perhaps the spacer is to make a wider rim. The 800-6 is a pretty big (and wide) tire and would not fit well on a skinny nose wheel intended for a smaller tire. Maybe the spacer is to give you a wheel width more suited to the large tire?

Matco is still in operation, have you tried contacting their technical people? Good luck!

Not yet. I’ll call next week. Still anybody out there have a spacer with their nose wheel.

Called Matco tech support fellow names George. Seemed to say spacers have been sent out with the nw600cc wheels, but did not seem to grasp that mine do not fit together well enough fit the three Allen wrench screws to hold the wheel sturdy together. Wants pictures. Anybody known how to send pictures? Bill 

10 months have gone by so you probably have this resolved one way or another.  Thought I'd reply just in case it helps someone else...

I also have the NW600CC wheel (kit purchased from Zenith ~2008).  I've not had it apart yet, but it looks like you need to have that 1" spacer lined up just right to get the wheel bolted back together.  See the attached file.

Attachments:
Bill;
This is Sam McNair. I found your (scratchy) voice mail message apparently days after you left it and never could find in my call log where I missed your call. The phone number that I think that you left in the message goes to someone else. I am up in Maine with my 801 and wont be back until end of first week of August. I would be glad to fly with you. Text or email me your contact info.
Sam McNair ssm6791@gmail.com 864-617-3192 Apologies i can't get the darn web site to accept a message to you any other way than this.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service