Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Newbie question
What's the best way to store raw parts so they don't corrode?
Replies to This Discussion
-
Permalink Reply by Roger Wibbels on
-
I've found that if I leave the finger prints on for more than a day or two they become very difficult, if not impossible to remove. I've been using some turtle wax liquid spray car wax on the part, and that will get the prints off if they haven't been on too long, plus protect it somewhat from future corrosive prints.
-
Permalink Reply by John Austin on
-
Don't know about Turtle Wax spray, but just a caution. Don't treat any bare metal parts with anything that has silicone in it (a lot of polishes do!) if you intend to paint it later ... it'll cause all sorts of grief!
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
