I have a 350iS with the newer style oil cooler. I have only found a few pictures on the internet/blogs, etc that show the new oil cooler.
It appears that the oil cooler needs to be mounted to the engine block in the second from the bottom hole (not where the photo shows it currently). This will require cutting the top of the bracket away. My bracket was clearly cut with a laser and has a burn mark at the top of the hole. If I trim away the remainder of the bracket this laser cut piece of material will be the only thing holding the oil cooler on.
Does everyone else have this? Any concerns with cracking?
Tags:
Zenith Planes & Parts For Sale
Classified listings for buying or selling Zenith builds and parts...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).