Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
oil pressure
O -200 A , Phillips XC , 200 degrees F oil temp : what should the oil pressure be at 1000 rpm & 2400 rpm ? thanks in advance
Replies to This Discussion
-
Permalink Reply by Clint L Gosch on
-
Hi Craig, on a 90F+ day my oil temp runs around 190F, I'm also running XC 20w50. Cruise pressure will be around 43psi, I've seen idle pressure go as low as 21psi at 850 RPM. The manual states 10psi as the minimal allowable idle pressure.
-
Permalink Reply by craig Williams on
-
thank you Clint
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
