Rotax 912ULS with 912UL crank and crankcase

All,

I have the opportunity to purchase a Rotax 912ULS with 912UL crank and crankcase. What are the PROs and CONs? I can purchase a 912ULS that has been rebuilt with a 912UL crank and crankcase. What would be any issues?

Keith

CH701 scratch building

Views: 727

▶ Reply to This

Replies to This Discussion

Permalink Reply by Jim and Amelia Isaacs on December 13, 2019 at 6:33pm

Hi Keith,

Recommend this weekend you search around on Rotax-owner.com to see if this has been discussed, then on Monday call Lockwood Tech Support 863-655- 6229, they take questions 9-10 and 2-3 Eastern Time.  I spent the better part of two years educating myself and searching for either a professionally rebuilt or a used, no stories, no aftermarket hot rod mods, Rotax 912 at a price I thought was reasonable as compared to a new engine, and finally decided they don’t exist. During my journey I talked to a lot of good, knowledgeable folks but also encountered some questionable characters, including one outright fraud that almost cost me thousands of dollars with no engine to show for it.  I ended up biting the bullet and forking out the money for a factory new one through Zenith, and now that I’m flying behind it, including soon with my wife, I’m ever so thankful I made that decision.  Be careful and good luck.

Permalink Reply by Shay King on December 19, 2019 at 4:20am

Hi Keith,

912ULS engines prior to sometime in 2006 had an issue with crankcase fretting. After 2006 the crankcases were improved to eliminate that issue. 

Is an 80HP 912 engine crankcase identical to a 100HP 912ULS crankcase? I don't know the answer to that.

I have had to replace the crankcase on my 912ULS due to fretting and it is very very expensive.

Permalink Reply by Wayne Woloshin on December 19, 2019 at 5:35pm

Start saving your money and buy a new motor the 80HP will work just fine if you want to budget for other items and save not buying the 100 HP. 

Permalink Reply by Keith Ashcraft on December 19, 2019 at 8:38pm
Hi all. Yeah, I think I will just wait and buy new. Definitely make me and my wife feel better about it.
Thanks all
Permalink Reply by David on January 25, 2022 at 10:13pm

Sounds like they left you with the weaker case.

It can also be machined so it bolts together with thru bolts instead of tapping the block.

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service