I find that Rotax 912ULS CHT Sensors, part 965531, cost $195 each. Has anyone found a more economical replacement?

Views: 492

Reply to This

Replies to This Discussion

I would think there has to be a cheaper alternative out there. Some of the prices Rotax charge for small parts is insane! I have a Rotax 912ULS too and hate being ripped off for parts too. I can somewhat understand it with a certified engine but not with the uncertified version. I believe they are (were) made by VDO. i haven't needed to source an alternate yet but this might be worth investigating.

VDO 323-801-010-001D




If it works, let me know!

With my kitfox I just rebuilt mine.  Don’t remember the part number offhand but I ordered from digikey 


I just heated up and cleaned out old, soldered wires to sensor and potted back in 

I should mention that my kitfox was a 93 912ul and I believe it may have had different temp coefficients


New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service