Hi all,

I've got my wings built to the point where I'm about to drill/cleco the leading edge skins. I'm getting cold feet about the slat vs VG debate. 

I have the brackets already built and clecoed on to the nose ribs as per the build manual. I have read the STOL Speed article on the slat/vg comparison and I am now hesitant to put my slats on and just leave my nose skins untouched.ive also read rockydogs build and others who've built thr slatted wing only to remove them after the fact.  Here are my thoughts so far:

Pros:

Part of the original design

They look really cool and sort of define the sky jeep

The aircraft WILL perform as advertised with them

Lots of data on flight Characteristics

Cons:

Extra weight

Extra build time

Decreased cruise performance 

May not provide any noticeable STOL characteristics compared to a vg.

Is there any other considerations I've not thought of here ? 

Thanks,

Mike.

Views: 174

Reply to This

Replies to This Discussion

I've got hundreds of hours on my STOL 750 (you didn't mention what model you are building)  both with and without VG's and with and without slats.  Every point you made is spot-on.  On the STOL 750, my slats were 14 lbs total (painted) and if removed, that goes directly to increase useful load.  I gained about 6-8 kts cruise speed.  And, you are correct that the STOL performance is still quite good without the slats.

The big difference is that the angle of descent/ascent is more shallow without slats, so slats do let you get into "tighter" strips although there's not that huge of a difference in landing or takeoff rolls.  So, if you're in to extreme STOL, you definitely want the slats.  My STOL 750 stalls very conventionally with slats off, and with slats on, you really can't define a definite stall - the descent rate simply picks up but it's still controllable.  The VG's lower the stall speed about 5 kts and help with controllability deeper into the stall.  As far as cruise speed, the old joke is that if you're looking for speed with a STOL, you've got the wrong airplane! LOL!  I saw no noticeable effect from the VG's on cruise.

I do admit, the plane lost some of its cool "funkiness" with slats off.  I shaved my brackets back to 20 mm height so I would still have sufficient edge distance to remount the slats and made "intermediate" brackets to restore the slats to there original position when bolted back on.

I've now got them back on with bigger tires and am playing more with the STOL again and having a ball!

John

N750A

Hi John, I really appreciate your input. You make an interesting point with descent rates/angles. I think when we consider STOL , at least for myself I'm always thinking of how fast it gets off as opposed to ability to get into tighter spots landing. 

For clarifications sake I am building a 701. My main intention is to use it for back country access, gravel bars, fishing, hunting, camping etc. When I bought the kit it seemed the closest thing to my ATV that I could fly. 

It's fairly easy to switch between the two, so try both and use what you like most.

It is easy to take the slats off.  They do add to the fun factor and make those over tree landings easy.  https://youtu.be/X2Kkygbo-Tk

Thanks for the video John. Great looking 750!

I just figured i would update this discussion. I unwrapped my nose skins after finishing up the work on the lower skins/trailing edge skins and see that the good people at zenith have already made CNC cuts in the nose skins to accommodate the slat bracket protruding through. So, with that work already done i believe i will leave the brackets in place and run the slats as per the original design. 

Good call given your intended mission. It’s not a cross county airplane design anyway. With slats I routinely operate my 701 out of my 1,000 ft. home field with mature trees at both ends. Once you are comfortable with the airplane, with slats you can use quite steep stabilized approach angles. Also, not that it matters now but add to the list of Cons of removing the slats “a reduced c.g. range” and for Pros “slipping with slats will drop you like a stone” 

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service