Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Transition training
I just finished 750 transition training with Greg Miller. It was well worth the time and cost. We flew 7.1 hours over two days. Greg kept the training focused and did not waste any time. His instructions and critics were right on target. I strongly recommend you attend his training.
You can reach Greg at 419.nine zero eight 3645
Replies to This Discussion
-
Permalink Reply by Cody Furlow
-
Where is he located?
-
-
He is located at Licking County airport about 25 miles east of Columbus OH. I flew into Columbus airport from Portland OR. Plenty of places to stay and eat.
-
Permalink Reply by Robin DeMarco
-
Thank you for the information. It's good to know where to get the training.
-
-
I could not find anyone else that conducts this training.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2025 Created by Zenith.Aero.
Powered by
