Where do I connect the shielded wires to on this magneto?

It's a Bendix S4LN-21. Trying to understand where the inner wire is connected as well as the outer shield wire. I'm guessing one goes to what appears to be a capacitor? Which one? And where does the other one go?
Tia
Gary

Views: 280

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by david shrader on September 12, 2015 at 11:59pm
Center wire (conductor called the "P" lead) from condenser to switch. Shielding to ground at mag and you can use the shielding at the switch as a ground for the mag. Or ground the shielding inside the cockpit an run a separate ground for the switch. Hope I've explained it clearly.

Dave
Permalink Reply by Tim Juhl on September 13, 2015 at 5:08pm

Someone correct me if I'm wrong, but I believe the shield should only be grounded at one end, usually somewhere on the body of the magneto.The capacitor is for noise suppression. 

The center conductor goes to the mag switch and it must be wired to go to ground when the magneto is to be disabled.

Tim

Permalink Reply by david shrader on September 13, 2015 at 7:59pm
I ground the shielding at the mag an use the shielding at the switch for ground. The capasator is to prevent the mag points from arching, without it the points will fail quickly.

Dave

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service