Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
-
Doug Eaton
- Male
- Redding, CA
- United States
- Blog Posts
- Discussions (47)
- Events
- Groups
- Photos
- Photo Albums
- Videos
Doug Eaton's Page
Profile Information
- Aircraft Model
- ZODIAC CH 601
- Project Status
- Flying
- Building From
- Purchased finished aircraft
- Engine installed (or plan to install)
- Jabiru
- Building Experience
- No Experience
- Flying Experience
- Private Pilot
- Building and Flying Info / Your Profession / Other Background Info
- Retired Banker. Flying since I was 16 years old. About 3,000 hours in several types. Looked in to Experimental Aircraft about two years ago. Have tried to learn as much as possible since then. Just completed rudder school at QSP. Ready to order either CH650 or 750 Cruzer. Using Corvair Engine as designed by William Wynn and his associates. Just located a core engine in Medford,Oregon. Picking it up this weekend. Would like to talk to some of the builders who have completed and flown the 650 or the Cruzer with a Corvair Engine.
Well, instead of turning that rudder into an airplane, I have found a very low hour 601XLB with a late model Jabiru 3300. I felt that flying was more important to me than building at this time. My wife and I love the plane! We purchased it in Tucson and it is being "ferried" to us in Redding, Ca on May 28th. We are getting our hangar ready for her now.
Thank you to all of those who responded to my questions on the Corvair engine and the performance of your aircraft. I could feel the pride you have when you spoke about all the effort you have invested.
- Home Airport (ie. KMYJ)
- O85 Benton Airpark, Redding,Ca
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Switch to the Mobile Optimized View
© 2024 Created by Zenith.Aero.
Powered by
Comment Wall (5 comments)
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers
Doug,
The "Adventure" Flying group sounds interesting. Give me a call at 530-913-6087 so we can talk about it.
Also, let me know if you ever plan on visiting GOO (Nevada County Airport). I would love to see your plane and show you what is going on with mine.
Van............
Doug, my 601HDS built to the latest drawings, Corvair engine, primed inside and out, leading edge tanks, full interior, and VFR equipped using MGL iEFIS, MGL V6 Comm, and Sandia remote transponder weighed in at a healthy 740lbs using calibrated, digital scales.
Doug, I only have about 11 hours on my 601HDS so I'm not the right person to give you numbers yet. I can tell you mine stalls about 45 kts. It does fly nice but it is not a fast plane.
I can tell you from experience to be very careful if you buy a kit that someone else started. I did and regret it; he only put about 100 hours into it but he worked a little on a lot areas. I had to literally undo everything he did and make and/or buy new parts. In the end, I doubt I saved any money but added several years to the build. However, in the end I have a plane and engine that I know every inch of. It may not be the fastest or the prettiest but I know that it was built to my standards.
As I was flying over the beautiful Gulf Coast last week (still in my FAA designated test area) in a plane that I built myself, in my garage... all the additional work didn't really seem all that important anymore : )
Hi Doug,
My CH 750 with the 3000 Corvair makes a wonderful plane. I'm happy as can be with it.
I'm a little disappointed with the cruise speed which is about 85-88MPH, but my 750 is especially draggy and I haven't yet started to clean it up. At WOT throttle I see about 2950 RPM and about 92 MPH at near sea level.
With max. gross load, it gets off the ground in about 500 feet and climbs out at 65 MPH at 700 ft/ minute on a warm 90 degree day. Density altitude problems are the least of my concerns,
The Corvair is a magnificant smooth running engine that i couldn't be happier with.
It ought to be perfect for you on a Cruzer.
Best of luck to you.
Doug Stevenson
N632DR
Hi Doug,
Welcome to home building and Zenith.aero! I chose the Corvair because I wanted to build my own engine and know my firewall forward inside and out. Yes, it does save some money in the process but that was not my primary objective. It was really my choice to make my project a homebuilt from spinner to rudder and after nearly 300 hours on the hobbs, I'm still glad I went this direction with the Corvair. I actually have the 601XL finished with the 650 canopy kit. Yes, it does fly slightly nose high and I would think the angle of incidence change with the 650 wing may have addressed this somewhat. I have not found it a big issue when landing. Regarding performance, I average about 5.3 gallons per hour and cruise at around 115 mph. This works fine for most VFR flying around the state joining other friends for breakfast and lunch and keeps fuel burn somewhat economical. I did fly my plane to Airventure 2012 and also once back to a Zenith Open Hangar event in Mexico, MO .. lots of fun taking my plane on longer cross country trips. I highly recommend you attend one of William Wynne's Corvair colleges to get to know him and other Corvair builders. This will also provide you the opportunity to get a lot of questions answered and understand his conversion approach.
Best regards,
Dave Gardea