Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
big nose
CH601, Jabiru 3300
One of the first test fits on the fuselage. At this point I already trimmed some 5 cm from the rear end and cut the slot for the landing gear.
The location of the air scoops (cabin heat and carb heat) is lightly scribed on the left side of the lower cowl. I had it for two years and only last week I noticed it.
I'll need to deal with epoxy and fibreglass to make the two halves fit properly on the front end.
Comment
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers