Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
IMAG1814
Comment
-
Comment by Clint L Gosch on March 11, 2013 at 10:23am
-
Used a paper template. Traced the diameter on graph paper, found the center, drew two perpendicular lines crossing at the center, then filled in the holes using the "calibrated eyeball" method. A few are off my a couple mm's but should seal up fine.
-
Comment by Jesse Hartman on March 11, 2013 at 6:25am
-
Yup I had to mill them down too. Would'nt clear the flange on the end of tank. Your holes are so evenly spaced..... do you have some type of indexer?
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers