Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Fuel switch installed
Comment
-
Comment by Dick Booher on September 10, 2013 at 7:56pm
-
We used oetiker clamps and we got them thru Fastanall
-
Comment by Mike Chekal on September 10, 2013 at 3:09pm
-
What hose clamps did you use at the end of the hose and where do you get them?
-
-
Hi Kevin. You have to have a return line since it is a fuel injected engine. The problem is you have to have a switch that puts it back in the tank you took it out of, or you will probably overfill that tank. Looks like there could of been a better way, but this is the way it has to be done. I think we could have used a header tank, but I didn't like that idea.
Dick
-
Comment by Kevin Collins on February 19, 2013 at 4:20pm
-
not sure why the complexity, do you have multiple tanks( i see six fuel lines ) is all this needed for the U/L install?
-
-
Fuel switch installed for UL350 IS engine
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers