Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
result
after passing along the router.
be very carefull this is dangerous for your fingers. Use thick gloves.
Comment
-
Comment by Henri Luyckx on July 20, 2009 at 2:37am
-
Hi robert
You can find the placement of the two holes on page 7-V-5
-
Comment by Robert Crawford on July 19, 2009 at 8:08pm
-
Henri, how did you come up with the placement of the two holes in the cutting block? I have the pivot hole drilled but can't find any reference to the other two holes.
Thanks,
Bob
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers