Online Community of Zenith Builders and Flyers
Push that stubborn rivet down, works great. Just drilled out old screwdriver with 3/32 bit. Great for sore fingers.
Tags:
Comment
I should sale a lot of my ideas, One of the main reasons I made this tool was, I saw on the Slat build video where the rivet didn't want to go in so the guy said you can drill out the hole again and the rivet will go right in. Well that works; the only problem is, now the holes that were designed to line up perfectly... DON'T. So I got a tweaked Slat and the same for my Flaps. Made me very unhappy.. If you force a few rivets in the rest will go in easier and it won't tweak the part you are building. Drilling out the hole when it is offset is VERY BAD ADVICE. I even used a hammer with some holes without any problems.
What a great idea! You aught to sell those.
Great Idea. I will be making one this weekend. I am sure that I have an old screwdriver laying around.
You know some of those rivets just don't want to go down, and on cold days my fingers couldn't handle it, had to do something. With this tool you have leverage. No more drilling, just push it in.
What a great idea!
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers