Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Jim Timm's Discussions
601XL Cable Tension Requirements
Started this discussion. Last reply by Phill Barnes Jul 29, 2009. 5 Replies 0 Likes
Jim Timm's Page
Profile Information
- Aircraft Model
- ZODIAC XL
- Project Status
- Flying
- Building From
- Kit
- Engine installed (or plan to install)
- Jabiru
- Building Experience
- Have worked on airplanes before
- Flying Experience
- Commercial / CFI
- Building and Flying Info / Your Profession / Other Background Info
- Retired Aerospace Engineer
Have an A&P License
- Home Airport (ie. KMYJ)
- KFFZ
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Switch to the Mobile Optimized View
© 2024 Created by Zenith.Aero.
Powered by
Comment Wall (2 comments)
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers
Given your professional background, what is your personal impression of all of this. Have you experienced any flutter with your aircraft and have your cables always been tensioned to Zeniths specs? Do you think that the wing rib that supports the bellcrank is adequetly stiffened to keep constant tension on the cables?
My aircraft is also a quickbuild but with a 650 canopy. I to have used the Jab 3300 engine, as it is manufactured 1&1/2 hours north of my home, I thought it would be the best choice. I also have the Jab USA FWF kit with the ground adjustable prop.
Check out my webpage
Regards
Phill Barnes
Thanks for your response.
The wing tip and mass balance weights are youtube videos and were posted as links below the pushrod pics but here they are again. It is very interesting that Zenith have seen these mods so it is nothing new to them.
Hope this helps
Regards
Phill Barnes