Larry Landucci
  • Male
  • Verona, WI
  • United States
Share on Facebook

Larry Landucci's Friends

  • Shane Free
  • luc levasseur
  • phillip maples
  • Dan Stanton
  • Phillip Owens
  • philip cronje
  • Bill Wilcox
  • Zenith.Aero
 

Larry Landucci's Page

Profile Information

Aircraft Model
STOL CH 801
Project Status
Flying
Building From
Kit
Engine installed (or plan to install)
Lycoming
Building Experience
Have worked on airplanes before
Flying Experience
Private Pilot
Building and Flying Info / Your Profession / Other Background Info
Retired Research Chemist
Home Airport (ie. KMYJ)
C29

Larry Landucci's Photos

  • Add Photos
  • View All

Comment Wall (9 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 6:04am on June 18, 2021, Michael Mccarthy said…

Hello,

My name is Mr. Michael Mccarthy, I have contacted you before without any response from you. Please replied if you receive this message. I have something very important to discuss with you, I have a vital information to give you. Could you please get back to me on (mmichaelmccarthy4@gmail.com ) for full details.

Michael Mccarthy.

At 3:19am on March 15, 2011, Robin Boyd-Moss said…
Hi Larry,

Did you get my mail about the use of the flight data systems fuel flow computer? Have done a few more hours since your last mail and still practising the landings!

Regards,

Robin.
At 12:03am on February 10, 2011, Robin Boyd-Moss said…

Dear Larry,

 

Thank you! We have both found that flaring even a little bit early cause eventual heavy sink and then the nose wheel drops hard so it is good to hear from an experienced pilot jthat maybe we are on the right track for this plane.

 

Do you have a good contact for someone at Zenith who will reply to e-mails. I write to Roger Dubbert but quite frankly it seems that this is an irritation to him as his reply time is worse than surface mail from Africa to America! I actually want to know how much difference a variable pitch prop would make to the performance of the plane as much in terms of take off performance as cruise speed. I have also asked him about the flight data systems fuel flow computer FC 10 which is in my plane but not fitted to the system yet.. I wonder if you have any experience with these and wheter or not you would advice setting it up.

 

I really appreciate your feedback and trust that this is not too much of a nuisance for you!

 

Kind regards,

 

Robin.

At 12:33pm on February 9, 2011, Robin Boyd-Moss said…
Dear Larry,

Very many thanks for your comprehensive reply. Somehow I had missed it until tonight- I do not know why! My son and I have flown about 50 hours in our plane now and are getting better as we go along. Stopping the nose dropping hard after the main gear is still sometimes a problem. I do think that our ASI is under-reading but it has been difficult to find out for sure as it is very windy here at the moment. Glad you approach speed a little bit higher as we find she sinks fast at anything lower.

We have done about 8 two hour cross countries and really enjoy the great visibility. Will keep you infomred how we are doing.

Robin.
At 7:22am on December 8, 2010, Robin Boyd-Moss said…
Dear Larry, I live in Kenya and have just completed and flown my 801. It has a O 360 Lycoming wiht standard prop from the factory. I have done 5 hours in the plane and my son about 4 all under instruction as we are newly qualified pilots. I am not sure whaich engine you ahve but I would interested to know what cruise speed you manage to get as we are only achieving 90 mph at 2500 rpm. Any other comments on approach speeds, flaps running tanks low would be greatly appreciated.

Regards,

Robin.
At 2:32pm on December 6, 2010, Phillip Owens said…
Well Larry here we are again Christmas time 2010 I hope you had a great year and the flying went well, now that I have finally got mine into the air I will be looking ofrward to having an opportuity to go somewhere as a pair of 801's. Have a great holiday season and the best to you and yours. phil
At 4:33pm on December 11, 2009, Phillip Owens said…
Hey larry, Merry Christmas and Happy New Year! Hope you and yours are doing well I look forward to flying with you in the spring! phil
At 12:17am on February 23, 2009, philip cronje said…
Hi Larry. We did 75 hours the first month in our 801.with the long range tanks, I have to strecth endurance to almost 9 hours on one flight! Fuel flows down to 4gph! Glazed the cylinders becauseof this though. To low power settings for 2 long! Having cooling issues on the oil temps and cylinder 2 at the moment. Did all our flying in winter and now in summer we are battling abit. Redoing the baffles and moving the oilcooler to the right rear baffle where we now take off bleed air from the cowl. Also repitched my prop from a 54 to 57 to better absorb power. We run almost 2900rpm staright and level at full power. Also did a 1" prop extension. As I go along, I tweak things to make it run cooler, bit faster etc. Found that with a slight flap down setting we get 5mph better cruise at the same power settings as well. Am also installing the VG kit on the elevator this week.
regards
Philip
At 12:21pm on February 12, 2009, philip cronje said…
Hi Larry, Philip here from South africa. How are you doing? I see from the pic above the rudder still has the "no Push" tab on it! Glad to see it is still good!

regards
Philip
 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service