Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Jake Reyna's Blog – March 2012 Archive (1)
XL seat bottom modification
I've wanted to change the seat bottom 6B18-6 from a curved piece to an angle so my two piece seat cushions would fit better. It would also allow for the use of a booster cushion under the seats if necessary.
Thought about using a hinge after cutting the seat bottom in two pieces, but the solution was much easier. On my XL the distance to the top of the rear gear channel is 147mm. After removing the seat bottom, I noticed the the midpoint on the curve was 140mm. The co-pilot seat…
ContinueAdded by Jake Reyna on March 19, 2012 at 7:00pm — 6 Comments
Latest Blog Posts
Most Popular Blog Posts
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
