Online Community of Zenith Builders and Flyers
December 02, 2025
Drilled and temporarily attached flapperons.
To make the flapperons counterweights lighter I decided to drill hoes in them.
Started drilling the flapperons counterweights.
Added by Alexander Samoylovich on March 11, 2026 at 5:59pm — No Comments
November 28, 2025
Added cotter pins to the control cable supporting rollers.
Attached the elevator top and bottom control cables. Safety pins installed.
Set the right wing trailing edge. Pay special attention to the angle supporting the fuel tank from behind. I quite forgot about it.
When installed the trailing edges on the left wing the inbound trailing edge had a higher angle of attack than the outbound trailing edge. I removed the trailing edges and tried again…
Added by Alexander Samoylovich on March 1, 2026 at 8:47am — No Comments
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).