Online Community of Zenith Builders and Flyers
N601LL is 100 hours now and only remaining item was needing some up elevator trim for level flight and not enough up trim for a proper flaps down engine out glide. The incidence of both wing and stab were good but as it does take quite some force to lift the elevator I decided to try a simple fix. I put an eye hook on stab, drilled a hole in elevator horn and installed s-hook there. Then connecting the two using #64 rubber bands discovered that nine was a good…
ContinueAdded by Joe Hopwood on June 22, 2020 at 7:16am — 5 Comments
N601LL is 100 hours now and only remaining item was needing some up elevator trim for level flight and not enough up trim for a proper flaps down engine out glide. The incidence of both wing and stab were good but as it does take quite some force to lift the elevator I decided to try a simple fix. I put an eye hook on stab, drilled a hole in elevator horn and installed s-hook there. Then connecting the two using #64 rubber bands discovered that seven was a good balance.
I have not…
ContinueAdded by Joe Hopwood on June 17, 2020 at 1:51pm — 4 Comments
On a ground adjustable 60 inch two blade prop on a Jabiru 3300, what's the ideal pitch setting, I have changed mine which produced high EGT's
Added by Raymond Woods on June 16, 2020 at 8:00pm — 2 Comments
Added by Kim R. Anderson on June 11, 2020 at 5:22pm — 1 Comment
Hi
I need some info / diagrams for dimensions of a Rotax 912 with a ring mount for a 650B. Made a start with using a Sling mount to the Rotax Ring... need a distance from firewall forward to Centre of Gravity. Can anyone who has done this help?? Any photos or advice welcome.…
ContinueAdded by Mark Jackson on June 8, 2020 at 4:51am — No Comments
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
1999
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).