Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
David A. Judkins's Blog – July 2013 Archive (1)
CH750 Wing Nose Rib Plans Question
Rookie question but would like some clarification before proceeding. My plans are Edition 2 Revision 1. I am drafting a form mold on paper before transferring it to wood. On the Wing Nose Rib (75W1-1) drawing, I am assuming the R53 radii measurement is from the tooling hole (190,32) and I have drawn it accordingly. On the plans, however, there is also a spot above and to the right of the tooling hold at x=175mm. Is there a significance to this 175mm mark that I am overlooking? Thanks for…
ContinueAdded by David A. Judkins on July 13, 2013 at 5:50pm — 2 Comments
Latest Blog Posts
Most Popular Blog Posts
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
