Yesterday, I finished drilling the remaining spar pilot holes and then followed up by drilling out to #21. I will put an angle on the Spar Web Doubler when I go to our chapter meeting next Saturday (my bending brake cannot handle .063" metal). Will pre-mount it later in the day.

This afternoon, I re-cut the spar web doublers for both wing spars and then drilled pilot holes along one side of one spar. Time and light did not permit me to finish the other side. I still need to mark rivet points for the ribs, L-angles, and the spar web doublers.

Trying to get more building time under my belt now that the weather has turned cooler. Today, I marked the drill points on the first wing spar and temporarily attached the spar caps. Great feeling! This week, I'll order a bunch of AN-470 rivets. Next weekend....lots of drilling and and some riveting.