The April 2019 issue of AgAir Update, the monthly magazine for the agricultural aviation (crop spraying) industry, reprinted a flight evaluation article of the STOL CH 701 "Sky Jeep" light sport aircraft (first published twenty years…

AOPA Live recently ran a story of staffer Paul Harrop building a Zenith rudder at the Zenith Aircraft factory:…

Here's my report of the 2019 Sun 'n Fun fly-in earlier this month (April 2 -  7) in Lakeland, Florida, with photos and videos of the trip to and from Lakeland from the…

My nose bowl finally arrived and I spent the weekend fitting the cowling panels - very nice fitting setup from the Weseman's. After that, I finished up my paperwork and sent it off to the FAA. Got a call last week and set the date for the Airworthiness Inspection! - March 19th!…

Here's a brief follow-up report of the 2019 Sebring U.S. Sport Aviation Expo, where we hosted, once again, the hands-on workshops during the four-day Expo. Watch the video:

As you can see in the above…

UPDATE: Read the follow-up report from the 2019 Sport Aviation Expo

Following up on the success the past couple of years with Zenith hands-on workshops at the …

Thank you to the Kratochwill boys! Tom and Tyler from Merrimac came down this last weekend and helped me set my wings. Great help! With everything set, I powdercoated all the steel fittings and my dad and I did the install on Monday. Filled up the gas tanks and taxied that afternoon. A little anticlimactic that afternoon as we were beat. BEAT! The…

Check out this gorgeous photo of Mark Phillips in his custom Zenith STOL CH 701, featured in the October 2018 issue of EAA Sport Aviation magazine.…

Zenith Aircraft Open Hangar & Fly-In Gathering Event Schedule

Friday, September 21, 2018

(Schedule subject to change: Latest update: Sept. 18, 2018)…

Thanks to all who visited and participated at the 2018 Zenith Homecoming! We had a great event!

Video clip of the event | Check out the…

Earlier this month I participated once again at the Great Alaska Aviation Gathering in Anchorage, and visited with area Zenith builders and flyers. The day after the show I went flying with Bill Wilcox in his STOL…

This weekend Dave and I decided to check out a British Columbia Forestry airstrip in the East Kootenay area of the Rocky Mountains. The airstrip is known as Sage Creek as it is adjacent to the creek of the same name. We had only heard about it last year and apparently is rarely visited and the condition was said to unmaintained and one should be careful.

We departed our home airstrips after work on Friday evening with our camping gear. We decided to go direct “over the top” to maximize…

So it has started, day two of my massive river trip. I am looking at the Grand Tetons out my motel window here in Driggs Idaho getting ready for the first day of the Missouri River.

Yesterday I left Santa Rosa California and flew here more or less in a straight line, having seen that country go by before. Today should be more interesting.…

Here's my report of the 2018 Sun 'n Fun fly-in held last week (April 10 - 15) in Lakeland, Florida, with photos and videos of the trip to and from Lakeland from the Zenith Aircraft factory in Mexico, Missouri. Watch the…

Congratulations to Deane Philip for taking first place in his Zenith STOL aircraft at the New Zealand Bush Pilot Championships in Omaka, New Zealand, on Saturday, February 3,…

The Tehachapi Society of Pilots of California has partnered with Oak Valley Charter Schools to build an airplane with high school students (providing successful students with scholastic credit).

The…

Here's my follow-up photo report of the 2018 Sebring U.S. Sport Aviation Expo, and of our flight to and from Sebring, Florida.

We took two Zenith airplanes on the trip to Florida: I flew the Zenith CH 750 Cruzer with my daughter (below) while Roger flew the new…

I wanted to finally reveal an electronics project that some of you may want to build.

It is cold outside, the engines need to be warmed for long periods of time, and no one wants to go to the hangar and wait for hours while the engine slowly soaks in heat.

This solution is called the “Hangar Buddy”, and it is based on an incredible project by Maria DeGrazia. You may have seen it in the EAA Experimenter under the name “piWarmer”. This is my version that has been…

2018 UPDATE: See the follow up photos and videos in the comments below this original story.

Zenith builders and pilots are made up of a very interesting group of individuals, and continue to be a source of inspiration.  Here's a brief story of one of them that was recently featured in the news:…

NEW: EAA BARNSTORMING DEALS: Exclusive offer to EAA members

Get FREE admission to the Sebring U.S. Sport Aviation Expo with your paid registration for the Zenith Aircraft hands-on workshop offered at the Expo! Sign up now for the…