Building time and tweaks

Now that we have the cylinder head temps within acceptable range I note the oil temp is higer than I would like, so will try opening up the air intake on the oil cooler, since it is baffeled the additional air should go thru the cooler and lower the temp. Will know after the change. Still running on Mineral Oil but temps seem to be stabalizing as we go along. Lets hope the weather cooperates.

Views: 84

Comment

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

Comment by Phillip Owens on November 10, 2010 at 10:58am
Sebastian is correct I am running the Jabiru 5100 8 Cyl 180 HP engine in a CH-801.
Comment by Sebastien Heintz on November 10, 2010 at 8:20am
Chris - I think you've guessed wrong on both counts. I believe it's the eight cylinder Jabiru 5100 engine and that's definitely a four-seat STOL CH 801.
Comment by Chris Aysen on November 10, 2010 at 6:45am
Phillip - You have a Jabiru 3300? On a 750?

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service