Cleaning the inside of the fuel tanks

After cutting the 59 mm hole for the fuel sender, I needed to get some chips out of the tank.

It worked well to get a small 110 VAC floodlight bulb and socket that would fit into the fuel cap hole to light the inside. To remove chips, taping a painters tack cloth to a long stick made it really easy to pick out random chips and make the tank inside clean and ready to seal the sender.

Larry Zepp - Zodiac 650B builder

Views: 477

Comment

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

Comment by Rebecca Anne Shipman on May 31, 2013 at 3:15pm

Sounds great. I used lots of masking tape - I work for 3M and get off spec rolls for free, so I use it for everything I can.  Picks up hair in the bathroom as well.

Comment by Henri Luyckx on May 29, 2013 at 2:06pm
Thanks for the tip Larry. It came just on a moment when I needed it.

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service