Comment

Comment by Terrence "Dr. Terry" Hall on December 30, 2016 at 7:36pm

Yes I used the same type of strap and modified to 9 ft for the Cruzer wing.

Comment by Mack P. Kreizenbeck on December 27, 2016 at 9:38pm

Charles did a excellent job on the wing cradle build. Can I recommend the installation of straps to keep the wings suspended - in other words to keep from touching the wood frame?

Mack

Comment by Charles Miller on December 24, 2016 at 3:00am

http://www.eaa.org/en/eaa/aviation-communities-and-interests/homebu...

This is what I used to build my wing stand. Modified the length to 9 Ft.  My wings made it safely across country from Oklahoma to Washington state. 

Comment by Terrence "Dr. Terry" Hall on December 22, 2016 at 2:44pm

Thank you, I am scheduled to become a member of one or two EAA chapter beginning  1/17. I definitely need some adult leadership. One of my old friends used to describe the difference between the National Guard and the Boy's Scouts as the presence of Adult Leadership

Comment by Mack P. Kreizenbeck on December 22, 2016 at 12:05pm

Greetings from Idaho,

Have you thought about contacting your local EAA Chapter? I'll be that they have one or two that they would be willing to lend.

Mack

Comment by Terrence "Dr. Terry" Hall on December 22, 2016 at 8:24am

thank you, I have followed most of the info from Homebuilthelp but failed to look at old tips.

Comment by John Burns on December 22, 2016 at 5:28am

Check out the Homebuilt help tip #21 Link to tip archive and the materials list Link to Materials List.  I built a slightly different version with a stand for each wing that allows me to hoist them up to the ceiling.  I could post that information if it will help someone.