Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
-
Geoffrey W Eather
- Male
- Mt Hutton
- Australia
- Blog Posts
- Discussions
- Events
- Groups
- Photos
- Photo Albums
- Videos
Geoffrey W Eather's Page
Profile Information
- Aircraft Model
- ZODIAC CH 601
- Project Status
- Nearly done
- Building From
- Kit
- Building Experience
- No Experience
- Flying Experience
- None
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
Comment Wall (2 comments)
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers
I finally got the other filler neck off. Had to saw it down to the threads and hammer it out. The tank threads look OK.
The cap is still on the tank. I dremmeled off the flange and was able to at least get the tank out of the wing. I can get slip joint pliers on it now, but it does not turn very well. I have soaked it with penetrating oil and will try again tomorrow. I will try a pipe wrench to see if it is big enough.
Good luck on yours,
Dave