CH 750 Upholstery seats, side panels
Looking for full upholstery for a 750 See More
Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Joe Stephens's Discussions
CH 750 Upholstery seats, side panels
Started this discussion. Last reply by Tom Vesely Feb 28. 8 Replies 0 Likes
Looking for full upholstery for a 750 Continue
Securing the Oil Drain Plug
Started this discussion. Last reply by David J. Beaulieu Oct 1, 2022. 3 Replies 0 Likes
This site has addressed what to do for securing the oil filter, any suggestions with regard to the oil drain plug? Drilling the bolt head or installing a water pipe clamp, both with wire tie.Continue
Alternator Stator Bolt Thread
Started this discussion. Last reply by Joe Stephens Aug 23, 2022. 1 Reply 0 Likes
The part number/description for the three bolts are: F0706040 Hexagon head screw - M6x40 - 8.8 Steel – Zinc plated Are the threads 1.0mm pitch or 1.25mmOne of the bolts backed out and now has a nice…Continue
Matco Internal Dual Caliper MH Wheels and Brakes with Axel
Started this discussion. Last reply by Joe Stephens Apr 6, 2022. 1 Reply 0 Likes
I have the following for sale, Matco Internal Dual Caliper MH Wheels and Brakes with Axel:MHMH6BD.75 UL 6" WHL & BRK .75D DUAL CAL, Gold with PH4XT calipers…Continue
Joe Stephens's Page
Latest Activity
"Joe , the T bar came from Brunner Enterprises. The size i used was 1”x7/16”.
Regards Bill."
Securing the Oil Drain Plug
This site has addressed what to do for securing the oil filter, any suggestions with regard to the oil drain plug? Drilling the bolt head or installing a water pipe clamp, both with wire tie.See More
Alternator Stator Bolt Thread
The part number/description for the three bolts are: F0706040 Hexagon head screw - M6x40 - 8.8 Steel – Zinc plated Are the threads 1.0mm pitch or 1.25mmOne of the bolts backed out and now has a nice round head, probably gonna use some blue loctite.Regards, JoeSee More
Matco Internal Dual Caliper MH Wheels and Brakes with Axel
I have the following for sale, Matco Internal Dual Caliper MH Wheels and Brakes with Axel:MHMH6BD.75 UL 6" WHL & BRK .75D DUAL CAL, Gold with PH4XT calipersWHLAXLE7 AXLE; ASSEMBLY A7 Both complete units have 200 hrs on them, new cost is $1100.00. Asking $750.00 plus shipping. Text me at 276-870-7485 See More
Profile Information
- Aircraft Model
- STOL CH 701
- Project Status
- Flying
- Building From
- Kit
- Engine installed (or plan to install)
- other auto conversion
- Your website (about your aircraft...)
- http://18643 Riverside Dr.
- Building Experience
- Have worked on airplanes before
- Flying Experience
- Private Pilot
- Home Airport (ie. KMYJ)
- kjfz
Comment Wall (1 comment)
- At 10:20am on February 14, 2024,
Bill Alexander said…
Joe , the T bar came from Brunner Enterprises. The size i used was 1”x7/16”.
Regards Bill.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
