Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
750 mixer bearing
In drawing 75-c-1-4the mixer bearing is of set , the four bolts are of set witch is the right way up
The short side up ore long side up
Peter
Replies to This Discussion
-
Permalink Reply by Jimmy Young on
-
Long side up. You want the bolts to be clear of the retaining tab on the end of the mixer control rod. See 75-CA-1, it shows a better view.
-
Permalink Reply by Peter Ratcliffe on
-
Thank you I thought that was the correct way but was just checking
In the home built help video the tab hit the bolts
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
