boot

What is used at the firewall of the 701 steering rods, to fire proof the cabin.

 

Views: 830

▶ Reply to This

Replies to This Discussion

Permalink Reply by Harmen van der Velden on August 23, 2011 at 12:20pm
jeep gear shifter boot. look in the jeep supply sites.
Permalink Reply by Phill Barnes on August 23, 2011 at 5:26pm

Hi Andre

This is what I did on my Zodiac using the Jeep shifter boots.

 

steering boots

 

steering boots are from a USA company called
Omix-Ada part No. 18606.06
Available from aftermarket Jeep centers uch as http://www.quadratec.com/products/52253_002.htm

http://www.tellico4x4.com/product_info.php/products_id/7565

http://www.baseline4x4.com/proddetail.asp?prod=18606.06

Aussie agent is Jeeepart Recyclers.
http://www.j-p-r.com/35/Links

Compression plates I made from 25 thou 6061-T6 and 3/32 aly rivets and sealed with sikaflex adhesive sealant.

I then made some flaps from silicone engine baffle that drape down over the boot holes on the firewall side in case of fire.

 

You can also make your own fire resistant boots by impregnating some fibreglass woven cloth with RTV silicon on a piece of board covered with sandwich wrap. When dry, form a cone and silicon it toghether and sew it with fibregalss strand if you like. This someone elses idea not mine so I can not take any credit for it.

 

Phill

Permalink Reply by Paul Saccani on August 30, 2011 at 8:28am

Thanks Mate! 

That was a very helpful post, those boots are ideal - I was looking for CV joint boots to do this job, but those ones are perfect.  Really helpful ideas about where to get them too.

 

Cheers!

Paul Saccani, Western Australia

 

Permalink Reply by andre beauchamp on August 31, 2011 at 8:43pm

thank you for your info.

 

Permalink Reply by andre beauchamp on September 1, 2011 at 8:39pm

I am not sure if you got my reply yesterday. Thank you for all the information. I will put it to good use.

Permalink Reply by Jaime Pujol on September 24, 2021 at 5:42am

Thank you for the info!

Permalink Reply by Chris Aysen on August 24, 2011 at 11:08am

Andre - I manufactured some boots over a plywood mold. I used fiberglass cloth and high temperature RTV gasket caulk.

Chris

Permalink Reply by andre beauchamp on August 31, 2011 at 8:43pm
thank you for your info.

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service