For final assembly and riveting of the rudder, is the rudder nose skin tucked back under the rudder rear skin or laid over top of the edge of the rudder rear skin. The latter seems more aerodynamic. However, I've seen it done both ways in pictures, even in pictures from the factory rudder class.

Views: 312

Reply to This

Replies to This Discussion

Chris,

I'm building a 650 not a stol but typically leading edge skins lay over the top of trailing edge skins. Your right it is more aerodynamic although many times this is reversed for initial drilling of the leading edge skins. Best wait for a stol builder to comment but I would bet this is the same.
I just finished my rudder and I tucked the nose skin under the rear skin for the initial fitting and drilling. Afterwards, I overlaid the rear skin when I did the riveting. I'm building a 750.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service