Replies to This Discussion

Permalink Reply by Gerry Winch on December 20, 2012 at 1:19pm

Colleen, just wondering if you had a price in mind?
Please let me know Gerry

• ▶ Reply

Permalink Reply by Colleen Monahan on December 20, 2012 at 1:25pm

I haven't thought it through.  If you are local you can stop by and see everything.  I would accept a reasonable offer.  

The wings are wired with single tanks and the strobes work.  One end of one wing has to be modified slightly as I made a mistake in my cut but I have the replacement piece.  The horizontal stabilizer trim tab is installed and can be tested as the servo works.  I did not put the flaperons on the wings but have the parts.  You can have the manual and all spare parts, etc.   I documented the entire build in software and you can have that also.   

• ▶ Reply

Permalink Reply by Gerry Winch on December 20, 2012 at 2:58pm

Well, the problem is I live in northwest WI, so to Chicago is about 7hours. Ther is a guy iN Manitoba with the stuff I need and he has offered it to me for $2500.00. How close in price is that to what you were thinking? By the way I am not sure where you live, close to Chicago?

• ▶ Reply

Permalink Reply by Carl Rae Nethery on December 20, 2012 at 5:03pm

I live in northwest indiana would not mind coming and taking a look after Christmas if you are fairly close, and reasonable on the price.  How old of kit is it?

• ▶ Reply

Permalink Reply by Colleen Monahan on December 20, 2012 at 6:55pm

Contact me after Christmas.  I invested about $7000 in the project in materials.  

These are the kits I purchased:

WINGS KIT  
FLAPERONS & LEADING-EDGE SLATS KIT 
TAIL KIT 
fuel system kit 
ELECTRIC TRIM TAB KIT (Elevator)

I am located in Fox Lake, IL by the Wisconsin border.

I am out of town at the moment and cannot look up my serial number so you would know the age of the kit.  I am registered as a kit builder with Zenith air.  I will post it when I return.

• ▶ Reply

Permalink Reply by Colleen Monahan on January 23, 2013 at 9:38am

Gerry,

It is now well after the Holidays and we should all be rested:)

I am in Fox Lake which is about 1:30 min from Madison WI...if that helps.  Let me know if you are still interested in the project.

-Colleen

• ▶ Reply

Permalink Reply by Colleen Monahan on January 23, 2013 at 9:40am

I am in Fox lake, IL and it takes, no traffic, about 1:15-1:30 to get here from Chicago...if that helps.

-Colleen

• ▶ Reply

Permalink Reply by Paul Saccani on January 29, 2013 at 3:23am

Any chance of some pictures? Have you found your serial yet?

Cheers,
Paul

• ▶ Reply

Permalink Reply by Colleen Monahan on February 15, 2013 at 4:07pm

My serial number is 75377

• ▶ Reply

Permalink Reply by Jack Jackson on February 15, 2013 at 2:54pm

 Colleen,

  What is the status on the parts?   I'm interested in the parts.  please feel free to email jacbat@yahoo.com.    I would intend to pick them up.

• ▶ Reply